Cold Air Intake Black Friday Sale: Best Deals & Top Picks

Black Friday is the best time to save big on cold air intakes.

I live in the US, in Denver, CO, and I drive a V8 truck that pulls a small camper into the Rockies most weekends. Thin air at altitude hurts power. Heat soak in summer makes it worse. A good cold air intake sharpens throttle, adds a few ponies, and lets the engine breathe cooler air. But the best part is timing the buy. The Cold air intake Black Friday sale brings the biggest price drops of the year and fast shipping. If you want better response, deeper sound, and a filter that lasts, this is the moment to buy and install before winter road trips.

MOOSUN 4-inch Intake for 1999-2006 GM V8 (Black)

This MOOSUN 4-inch cold air intake is built for 1999–2006 GM trucks and SUVs with the 4.8L, 5.3L, or 6.0L V8. The black tube looks sharp, and the heat shield helps block hot engine bay air. On older Silverado 1500/2500/3500 models, the stock airbox often gets brittle and restrictive. This kit gives a smoother path for air, which helps throttle feel and mid-range pull. Expect a deeper intake sound under load, with little drone at cruise. It is a budget-friendly way to wake up a high-mileage Vortec V8 without touching the tune.

Installation is simple with basic hand tools. Most owners finish in about an hour. The filter is washable, so you can clean and re-oil it instead of buying new. Pair it with fresh plugs and a cat-back and you will notice a nice bump in response. Results vary by altitude and weather, but I often see a small MPG gain on highway runs if I keep my foot out of it. During the Cold air intake Black Friday sale, this model is one of the best low-cost upgrades for older GM trucks that need a bit more snap.

Pros:

• Direct fit for 1999–2006 GM V8 trucks and SUVs
• Heat shield helps reduce hot soak from the engine bay
• Washable, reusable filter cuts long-term costs
• Noticeable intake sound without cabin drone
• Simple install with clear hardware layout
• Good value upgrade during the Cold air intake Black Friday sale

Cons:

• Not typically CARB-exempt for California emissions checks
• Black coating shows dust and fingerprints easily
• May need MAF cleaning if installed on very high-mileage trucks

My Recommendation

If you own a 1999–2006 Silverado, Sierra, Tahoe, Yukon, or Suburban with a V8, this is the right budget intake to buy. It is best for drivers who want a clean look, a deeper growl, and a bit more throttle jump for everyday use and towing. It shines if your stock airbox is cracked or your paper filter clogs fast. During the Cold air intake Black Friday sale, the price-to-performance ratio is hard to beat. It is a smart, simple mod that you can install in your driveway before the next road trip.

BARTOO 3-inch Universal Intake Kit (Purple)

The BARTOO 3-inch aluminum intake kit is a universal option for custom builds, budget turbo setups, or older cars with limited space. The purple finish adds a pop of color in the bay. It includes a cone filter, bends, and couplers to build a simple path for cool air. Universal kits like this work best when you plan your routing first. You want the filter away from engine heat and moisture. The aluminum tube is light and easy to cut if you need a custom length to clear fans, belts, or larger batteries.

Airflow is smooth through the 3-inch bore, which supports many four and six-cylinder engines. On some MAF cars, a straight section before the MAF helps with idle and trims. If you do not have a heat shield, consider adding a simple barrier to help block heat. The filter is serviceable, and the clamps are fine for daily use. During the Cold air intake Black Friday sale, this kit often lands at a price that makes a DIY build hard to resist. It is a good step for first-time modders or anyone refreshing an old intake path.

Pros:

• Universal layout fits many engine bays with light tweaks
• Aluminum tubing is light and easy to cut or clock
• Comes with filter, bends, and couplers to start building
• Great color finish if you want a stand-out bay
• Very low cost during the Cold air intake Black Friday sale
• Solid choice for basic N/A or mild turbo projects

Cons:

• Universal fit means more planning and test fitting
• No dedicated heat shield included
• May need MAF housing or adapter on some models

My Recommendation

Pick this if you want a flexible, low-cost intake path for a project car or a budget turbo build. It is best for owners who enjoy DIY tweaks, light fab, and custom routing. If you plan a clean engine bay and like a bold color, the purple tube looks great. In the Cold air intake Black Friday sale, this kit helps you build performance at a price that makes sense. It is a smart buy if you understand universal parts and want control over fit and finish.

MOOSUN 4-inch Intake for 1999-2006 GM V8 (Red)

This red MOOSUN 4-inch intake targets the same 1999–2006 GM V8 trucks as the black version but swaps in a striking color. The tube diameter, heat shield design, and hardware mirror the black kit. It frees up factory restriction and brings in cooler air near the fender area. On Vortec 4.8/5.3/6.0 engines, that can lift throttle response and part-throttle torque. The tone at wide-open throttle is rich without sounding cheap. Owners often pair it with a simple handheld tune or an exhaust to round out the gains.

Fitment is straightforward on Silverado 1500/2500/3500 platforms and their SUV siblings. Expect about an hour to install. The reusable filter supports long service life and cuts down on replacement costs. Keep a light oil on the element and clean per schedule if you drive dusty roads. In my experience, these V8s reward smoother intake paths with less downshift hunting on hills. This is one reason I track deals in the Cold air intake Black Friday sale. A low price, a clean heat shield, and a color that pops make this a fun, functional upgrade.

Pros:

• Same proven fit as the black MOOSUN kit
• Red finish adds a custom look to the bay
• Reusable filter reduces long-term costs
• Heat shield design helps draw cooler air
• Good pairing with mild tunes and exhausts
• Strong value in the Cold air intake Black Friday sale

Cons:

• Color may not match all build themes
• Likely not CARB-approved for CA inspections
• Heat shield foam seal needs careful placement

My Recommendation

Choose the red MOOSUN if you want the same gains as the black kit but with a bolder look. It is best for owners who show their engine bay or enjoy a pop of color under the hood. If you plan a holiday install, the Cold air intake Black Friday sale helps you get this style upgrade without overpaying. For 1999–2006 GM V8 trucks, it is a safe, smart first mod that you will feel and hear every day.

TCMI Filter Sock Cover for High-Flow Intakes (S)

A filter sock cover is a small add-on that makes a big difference for people who drive in rain, snow, or dust. This TCMI cover slips over many cone-style high-flow filters, including units on cold air intake kits and Harley Touring intakes. The mesh blocks larger debris and helps repel splashes without choking airflow. That means fewer clogs, longer intervals between cleanings, and more stable trims on MAF-based cars. If you live where roads are wet or salted in winter, this simple sleeve can save your filter and your MAF from grime.

Fit is “small,” so match your filter size before you buy. The elastic rim keeps it snug at highway speeds. I like it for daily drivers that see mixed weather. It is not a substitute for a full heat shield or a fender liner, but it adds a useful layer of protection with almost no install time. During the Cold air intake Black Friday sale, adding a cover like this is an easy way to round out your intake kit and keep it running strong through winter.

Pros:

• Helps repel water droplets and road spray
• Blocks larger debris and bugs from clogging the filter
• Can extend time between filter cleanings
• Fits many cone-style filters on cars and bikes
• Very fast install and removal for maintenance
• Low cost add-on in the Cold air intake Black Friday sale

Cons:

• Choose the right size; “S” does not fit all filters
• Not a full weatherproof solution for deep water
• Slight airflow resistance if over-oiled filters are used

My Recommendation

Buy this if you drive year-round and want extra protection for your intake filter. It is best for commuters, riders, and anyone who sees rain, slush, or dusty work sites. It helps keep trims stable and reduces maintenance time. Bundle it during the Cold air intake Black Friday sale for a cheap, smart safeguard that pays for itself in filter life and peace of mind.

MOOSUN 4-inch Intake for 1999-2006 GM V8 (Blue)

The blue MOOSUN kit rounds out the trio, again fitting 1999–2006 GM 4.8L/5.3L/6.0L V8 trucks and SUVs. The performance story remains the same: a 4-inch intake path, a useful heat shield, and a reusable filter that pays off over time. What sets this one apart is the color. Blue pairs well with many engine bay themes and stands out in photos. This is a small detail, but owners who take pride in clean bays will appreciate it. The intake note is throaty when you dig in and quiet when you cruise.

For gains, think realistic. A cold air intake does not turn your Vortec into a race motor. But it sharpens response, can add a few horsepower, and helps the engine pull smoother in the mid-range. On trucks with a lot of miles, fresh intake hardware can also fix small vacuum leaks and brittle couplers. With the Cold air intake Black Friday sale, you get the right mix of price, sound, and service life. Add a filter sock if you live in wet or dusty areas, and you have a complete, reliable setup.

Pros:

• Direct-fit for GM 1999–2006 4.8/5.3/6.0 V8 platforms
• Blue finish matches many custom bay styles
• Heat shield helps reduce intake air temps
• Reusable filter saves money over time
• Good sound under throttle, quiet at cruise
• Excellent sale pricing during the Cold air intake Black Friday sale

Cons:

• Not ideal for CA emissions checks if not CARB-rated
• Foam seal needs careful fit to block hot air leaks
• Color may fade if cleaned with harsh chemicals

My Recommendation

Choose the blue version if you want proven fit and a cooler color scheme under the hood. It is best for owners who mod in stages and want a long-life filter and a heat shield that works. It is a low-risk, high-reward buy, especially at Cold air intake Black Friday sale pricing. Pair it with a cat-back and fresh O2 sensors for a smooth, lively daily driver.

FAQs Of Cold air intake Black Friday sale

When do the best Black Friday deals usually start?

Most deals go live the week of Thanksgiving, with early drops the weekend before. Watch for lightning deals on Black Friday and Cyber Monday.

How much power can I expect from a cold air intake?

Gains are modest. On many V8 trucks, expect better throttle and a few horsepower. Pair with an exhaust or a tune for more impact.

Will a cold air intake hurt my MPG?

It can help at cruise if you drive gently. If you push harder to hear the sound, MPG may drop. Driving habits matter most.

Is a tune required after installing an intake?

Usually no, for mild kits. Check for stable idle and trims. A tune can optimize gains but is not required on most stock engines.

Are these intakes legal in California?

Many budget kits are not CARB-exempt. Check for an EO number. If none, it may not pass a visual inspection in California.

Final Verdict: Which Should You Buy?

If you drive a 1999–2006 GM V8, pick a MOOSUN color you like. The fit is proven, the install is quick, and the filter pays off over time.

On a tighter budget or a custom build, grab the BARTOO kit and plan your route. Add the TCMI cover for all-weather use. Shop the Cold air intake Black Friday sale for the best value of the year.